Hunza Pure LED Pool Light D10 - Stainless Steel - Low Voltage

The Hunza PureLED Pool Light is an underwater luminaire designed for recessed installation in swimming pools.

Although supplied with a 12V integral driver/convertor, this fitting requires a remote transformer and installation in Parallel.

This luminaire is fully submersible up to 9m and tested to an IP68 water protection rating.

The luminaire is held in the PVC canister by two "O" rings. There are no mounting screws in the flange to spoil the aesthetics of this luminaire.

Up to 600mm (2 ft) of cable can be coiled up inside the mounting canister, enabling the luminaire to be removed for lamp changing above the water line.

This luminaire is supplied with a PVC canister.

WARNING - out of balance pool chemicals may cause the luminaire to corrode at a rapid rate. In salt water an increase in water temperature of 10º will double the corrosion factor. 316 stainless steel is suitable for situations of up to 1000 parts per million of chloride. Where an automatic chlorinator is employed an excess amount of chlorine may be produced. The Hunza PureLED Pool Light is electro polished to increase corrosion protection.

Hunza PureLED has an integrated LED chip and the parts are serviceable.

Moonlight Design recommends that all lighting should be installed by a registered NICEIC electrician.